China Mixing tank's role is to material mixing, mixing, reconcile, homogeneous, stainless steel mixing tank according to the requirements of the production process design and configuration of the structure can be standardized and user-friendly. Mixing tank can realize feeding control, discharging control, stirring control and other manual automatic control during the stirring process.
Goldenmachine Mixing Tank is widely used in coatings, medicine, building materials, chemicals, pigments, resins, food, scientific research and other industries. The equipment can be made of carbon steel, stainless steel and other materials according to the technological requirements of the user's products, as well as heating and cooling devices to meet the needs of different processes and production. The heating mode has jacket electric heating and coil heating. The equipment has the features of reasonable structure design, advanced technology and durable, simple operation and convenient use. It is an ideal chemical equipment with less investment, quick operation and high profit.
The power output of the motor in the mixing equipment is transmitted to the mixer via the mixing shaft so the mixing shaft must be strong enough. In the meantime, the stirring shaft should be connected with the agitator as well as the shaft sealing device, bearings, couplings and other components. Therefore, the stirring shaft should have a reasonable structure, high machining precision and tolerance.
In a stirred vessel, fluid can flow in all directions to the agitator. Fluctuations in the fluid vary in length and direction. The need to control the rate and direction of backflow can be used to determine the flow regime. The draft tube is a cylinder which is opened up and down and is installed in the container and plays a guiding role in the agitation and mixing so as to increase the degree of agitation of the fluid in the container and enhance the direct shearing effect of the agitator on the fluid and cause certain circulation Flow, so that the container fluid can be through the draft tube strong mixing area, improve mixing efficiency. After installing the draft tube, the circulation path is limited, reducing the chance of fluid shorting. The draft tube is mainly used for the diversion of propeller, screw and turbo agitators.